EMR Australia offers Australian residents the option to hire various meters. The following terms and conditions apply to meter hire:
Hire period is for seven days from the date on which the equipment is received. It is deemed to be received when it reaches the address or post office box of the hirer. EMR Australia PL inspects equipment for condition before sending it to the hirer and packages it carefully for transportation by post.
The hirer agrees to take good care of the equipment during the hire period and not to allow the equipment to be used by anyone outside his or her immediate family. The hirer agrees to return the equipment on or before the required date or to pay the necessary late fee. Late fees are calculated at $10 a day for one meter; $20 a day for 2 meters and $25 a day for 3 meters. These fees may be billed directly to the hirer’s credit card. If the hirer fails to return the meter(s) within one month, he or she will be charged for the full cost of the meter(s) and a $20 administration fee.
The hirer agrees to return the equipment to EMR Australia PL in good condition. If equipment is returned in a damaged state, EMR Australia PL has the right to charge the hirer for the replacement cost of the equipment. The hirer further agrees to return the meters carefully packaged for transportation by the postage method indicated in the kit. Should the hired equipment hired require repair during the hire period, the hirer agrees to contact EMR Australia PL and not to undertake any repairs him- or herself. EMR Australia PL will organise the repair or replacement of the equipment.
The hirer may return DE2 filters included in the deTekta hire package if they are in as-new condition, suitable for resale. If the DE2 filters or their packaging are damaged in any way, the hirer agrees to pay the purchase price for the filter(s).
EMR Australia PL’s meters may have some degree of inaccuracy and are intended to provide guidance of exposure levels. They are not to be used for medical, legal, certification or similar purposes.
The hirer accepts complete responsibility for any injury or loss resulting from the use of the equipment and agrees to indemnity EMR Australia against all claims relating to such injury or loss.
Reduce the level of dirty electricity in your home or workplace with the DE3 Dirty Electricity Filter. Our DE3 filters can be used to reduce the level of dirty electricity (DE) present in your home or workplace. They are designed to fit Australian power outlets and bear the C-tick.
We recommend you measure DE with the deTekta DE meter to select the best position for the filters. We are currently waiting for more stock of this meter.
Plug the filter into a power point as close to the source of DE as possible and turn the power point on. When you check the reading on the deTekta, you’ll see that the level of DE has dropped and the percentage by which it has dropped.
It’s important to locate the filters as close to the source of DE as possible. If DE is entering the house from the neighbourhood wiring or from solar panels, plug the filter close to the meter box. If it’s coming from an appliance, plug the filter into a socket near the appliance. It’s important to reduce DE close to the source or it will flow backwards and forwards on the house wiring between the source and the filter(s).
DE3 filters reduce high-frequency noise on electrical wiring. Remember, they don’t reduce the electric or magnetic fields present from this wiring.
A detailed information booklet is available with the hire or purchase of the deTekta dirty electricity meter, used in conjunction with the filters. It contains information and guidance for locating filters for optimum results.
The DE3 filters are an improvement on the earlier model DE2 filters. They have added safety protection by adding a thermal (heat activated) fuse and a high-voltage spike absorbing varistor as electricity systems are getting far more high voltage spikes on them that have been shown to be able to shorten the life of the capacitors.
We recommend that, once connected, the DE3 filter should be left on all the time.
What is dirty electricity?
For information about dirty electricity, see our article 'Could Dirty electricity be contributing to health problems in your home or workplace?' here.
The unit contains a 10 microfarad a.c. mains-voltage rated capacitor, discharging resistor and fuse. Unlike some DE filters on the market ours contain
an electric-field screen inside the case which is connected to the Earth pin. Some filters on the market are not even internally fused. Our DE3 units
have the Australian C-tick and are fully approved to European safety standards.
Here's what customers have said about the DeTekta Dirty Electricity Filter!
"Since putting the filters in our house, I have noticed I am sleeping better and have become much clearer cognitively."
“My wife and I both noticed an enhanced feeling of groundedness, relaxation and peace in the house after installing the DE filters. We are of course both sensitive to EMF.”
“My sleep improved immediately after installing the filter.”
"Just spoke to Monday's client where I installed DE filters = she is raving!! So happy. Felt that everything was clearer and lighter. THANKYOU!!" by L.
"We were surprised at how much DE was coming into our house from the mains. Also, we found sources of DE generated mainly by power supplies for various electronics (eg computer) and other things that were plugged into sockets or powerboards. DE filters were subsequently purchased and they worked effectively in bringing these readings down to safer levels. We've also employed an electrician to remove all our dimmer switches!" By W.R.
I'm delighted to report that a customer reported today that she was able to live comfortably in her house for the first time in five years after filtering her dirty electricity. Lyn McLean
"The dirty electricity meter and filters have made a great improvement. I am sleeping better. My whole body was aching...that has improved a lot. Thank you." By B.L.